Page 3 of 3 FirstFirst 123
Results 41 to 49 of 49

Thread: 11's finally!!!

  1. #41
    Member Green2G's Avatar
    Join Date
    Jun 2007
    Posts
    2,099
    Rep Power
    461814

    Default 11's finally!!!

    Thanks guys.

    Mouser, its the AEM box.

    Paul, its a very similar setup but different car. Man that was a long time ago. We were nuts then.
    ____________________________________________

    Old School Supperleggera's still for sale.
    PM for more details, need them gone.

  2. #42
    Member Green2G's Avatar
    Join Date
    Jun 2007
    Posts
    2,099
    Rep Power
    461814

    Default

    Well finally got the NLTS sorted out and have it set at 6500RPM. It works great and virtually no delay between shifts but the car is now spinning at the top of 2nd going into 3rd, so, I may need to get some drag radials to stay hooked up. Plus I'll then be able to launch harder and lower the 60' even further. For the time being, I'll lower tire pressure to 20psi at the track. Last time I didn't and ran 32psi spinning when launching.

    Not sure when I'll get a chance to hit the track though but I do have a G-tech, yes I said G-tech lol, that I may test just for kicks.

  3. #43
    Member
    Join Date
    Nov 2014
    Posts
    2,446
    Rep Power
    1126365

    Default

    G tech can be accurate. Especially if you have a nice straight road and repeat the run.

  4. #44
    Member Green2G's Avatar
    Join Date
    Jun 2007
    Posts
    2,099
    Rep Power
    461814

    Default



    Best I could do on pump94 last night. 35psi of boost.
    Last edited by Green2G; July 5th, 2015 at 10:26am.
    ____________________________________________

    Old School Supperleggera's still for sale.
    PM for more details, need them gone.

  5. #45
    Stupid sexy shlammed shlammed's Avatar
    Join Date
    Jul 2011
    Location
    Kingston, On
    Posts
    11,939
    Rep Power
    1018622

    Default

    16.2. Not bad. 😂😂

    Good numbers man.
    www.facebook.com/hellafab
    Precision Welding and Custom Fabrication

  6. #46
    Stupid sexy shlammed shlammed's Avatar
    Join Date
    Jul 2011
    Location
    Kingston, On
    Posts
    11,939
    Rep Power
    1018622

    Default

    Whats it going to take to get your 10sec time? Cut down that 60ft?
    www.facebook.com/hellafab
    Precision Welding and Custom Fabrication

  7. #47
    Senior Member snail's Avatar
    Join Date
    May 2014
    Location
    ottawa
    Posts
    5,975
    Rep Power
    1977179

    Default

    Thats strong run with only a 1.9 60ft. Lower that to 1.6 and you'll be dangerously close to 10s
    87GN
    94 Miata

  8. #48
    Member Green2G's Avatar
    Join Date
    Jun 2007
    Posts
    2,099
    Rep Power
    461814

    Default

    Quote Originally Posted by shlammed View Post
    Whats it going to take to get your 10sec time? Cut down that 60ft?
    Pretty much that. Just need to find the right combination of tire pressure and 2-step setting. The car did run a 1.779 60' earlier that night but the boost was lower. Netted an 11.88@123.5.

    I have run 1.6x 60' with my previous talon so I know it is possible without changing parts.

    I also have methanol on tap but for some reason, the knock sensor registers slighly higher knock counts when I use it. Probably dumping too much with the NOS nozzles in each runner. I may switch to a single nozzle in the upper intercooler pipe to see if that makes a difference.

  9. #49
    Member Green2G's Avatar
    Join Date
    Jun 2007
    Posts
    2,099
    Rep Power
    461814

    Default

    Quote Originally Posted by snail View Post
    Thats strong run with only a 1.9 60ft. Lower that to 1.6 and you'll be dangerously close to 10s
    Thanks! That's the plan before season end.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •