PDA

View Full Version : Blu808 C6 Corvette Race Car Build Video



RandomHer0
February 4th, 2011, 09:21am
Won't be able to watch these till I get home. But if you have time, watch and comment.

Enjoy!


Watch as we take a normal C6 Corvette and turn it into a fire breathing 750 hp full on race car.


Episode #1 http://vimeo.com/17958947

Episode #2 http://vimeo.com/18600600

Episode #3 http://vimeo.com/18870562

Episode #4 http://vimeo.com/19282602



Let us know what you guys think!


The Corvette is really coming together now that we are in final assembly.

Here you can see the KSport air jacks.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs038.snc6/166891_498551764102_553679102_6207038_1825102_n.jp g

The plumbing for the jacks.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs785.ash1/167507_498549509102_553679102_6207028_255972_n.jpg

The hard lines.

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs246.snc6/179423_498549034102_553679102_6207023_1112162_n.jp g

We also have teamed up with Aimsports for our data logging and display needs. The Carbon panel will be used to mount the Aimsports display.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs056.snc6/168651_498073974102_553679102_6201219_5010068_n.jp g

We also finalized the KSport hydro ebrake assembly, steering column, and seating position.

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs276.snc6/180465_497640259102_553679102_6195948_2461420_n.jp g

Since the car is going to be a 10% matte black base coat we popped the headlights in the over at 220 degrees for 25 minutes to melt the glue and separate the lenses. We will then paint the silver part black.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs257.snc6/180513_497220584102_553679102_6190703_5245020_n.jp g

Finally the steering system is complete.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs745.ash1/163787_495134349102_553679102_6162029_149732_n.jpg

The guys over at RPM Transmission are really helpful. They sent over the parts to upgrade the 08 Z06 differential to that of the new ZR1. We will be assembling the new diff with the added carbon plates, springs, and sliders. We have opted to not go with a OS Giken unit at this point.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs279.snc6/180713_494906309102_553679102_6159467_7179375_n.jp g

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1396.snc4/164828_494912319102_553679102_6159540_6721853_n.jp g

Before the body went off to paint we mounted up the LG Front Splitter. The fit is perfect on all the LG Body parts!

http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs270.snc6/179805_494032054102_553679102_6149010_5176523_n.jp g

Here is the GT04XD dual disc clutch we will be using in the Vette. Exedy makes the best clutches on the market. The amount of engineering that goes into each of their clutches is what makes them the best. We can run the whole season on 1 and never have to worry about the durability.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs255.snc6/180385_493346349102_553679102_6140731_4634016_n.jp g

Spectrel
February 4th, 2011, 10:22am
Nice, can't wait to watch the vids later

RandomHer0
February 5th, 2011, 04:07pm
Decent series so far, a bit dry, lots of fab, lots of tech stuff.

RandomHer0
February 16th, 2011, 08:43am
New ep.


http://vimeo.com/19880027

RandomHer0
April 1st, 2011, 12:11pm
Car sounds incredible.


http://vimeo.com/20992560

GT-squared
April 1st, 2011, 01:34pm
Wow. that beast turned out awesome.

Jethro
April 1st, 2011, 01:36pm
Decent series so far, a bit dry, lots of fab, lots of tech stuff.

fab is fab. if you like fab.